x86/fpu: Clear XSTATE_BV[i] in guest XSAVE state whenever XFD[i]=1

Description

In the Linux kernel, the following vulnerability has been resolved: x86/fpu: Clear XSTATE_BV[i] in guest XSAVE state whenever XFD[i]=1 When loading guest XSAVE state via KVM_SET_XSAVE, and when updating XFD in response to a guest WRMSR, clear XFD-disabled features in the saved (or to be restored) XSTATE_BV to ensure KVM doesn't attempt to load state for features that are disabled via the guest's XFD. Because the kernel executes XRSTOR with the guest's XFD, saving XSTATE_BV[i]=1 with XFD[i]=1 will cause XRSTOR to #NM and panic the kernel. E.g. if fpu_update_guest_xfd() sets XFD without clearing XSTATE_BV: ------------[ cut here ]------------ WARNING: arch/x86/kernel/traps.c:1524 at exc_device_not_available+0x101/0x110, CPU#29: amx_test/848 Modules linked in: kvm_intel kvm irqbypass CPU: 29 UID: 1000 PID: 848 Comm: amx_test Not tainted 6.19.0-rc2-ffa07f7fd437-x86_amx_nm_xfd_non_init-vm #171 NONE Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 RIP: 0010:exc_device_not_available+0x101/0x110 Call Trace: <TASK> asm_exc_device_not_available+0x1a/0x20 RIP: 0010:restore_fpregs_from_fpstate+0x36/0x90 switch_fpu_return+0x4a/0xb0 kvm_arch_vcpu_ioctl_run+0x1245/0x1e40 [kvm] kvm_vcpu_ioctl+0x2c3/0x8f0 [kvm] __x64_sys_ioctl+0x8f/0xd0 do_syscall_64+0x62/0x940 entry_SYSCALL_64_after_hwframe+0x4b/0x53 </TASK> ---[ end trace 0000000000000000 ]--- This can happen if the guest executes WRMSR(MSR_IA32_XFD) to set XFD[18] = 1, and a host IRQ triggers kernel_fpu_begin() prior to the vmexit handler's call to fpu_update_guest_xfd(). and if userspace stuffs XSTATE_BV[i]=1 via KVM_SET_XSAVE: ------------[ cut here ]------------ WARNING: arch/x86/kernel/traps.c:1524 at exc_device_not_available+0x101/0x110, CPU#14: amx_test/867 Modules linked in: kvm_intel kvm irqbypass CPU: 14 UID: 1000 PID: 867 Comm: amx_test Not tainted 6.19.0-rc2-2dace9faccd6-x86_amx_nm_xfd_non_init-vm #168 NONE Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 RIP: 0010:exc_device_not_available+0x101/0x110 Call Trace: <TASK> asm_exc_device_not_available+0x1a/0x20 RIP: 0010:restore_fpregs_from_fpstate+0x36/0x90 fpu_swap_kvm_fpstate+0x6b/0x120 kvm_load_guest_fpu+0x30/0x80 [kvm] kvm_arch_vcpu_ioctl_run+0x85/0x1e40 [kvm] kvm_vcpu_ioctl+0x2c3/0x8f0 [kvm] __x64_sys_ioctl+0x8f/0xd0 do_syscall_64+0x62/0x940 entry_SYSCALL_64_after_hwframe+0x4b/0x53 </TASK> ---[ end trace 0000000000000000 ]--- The new behavior is consistent with the AMX architecture. Per Intel's SDM, XSAVE saves XSTATE_BV as '0' for components that are disabled via XFD (and non-compacted XSAVE saves the initial configuration of the state component): If XSAVE, XSAVEC, XSAVEOPT, or XSAVES is saving the state component i, the instruction does not generate #NM when XCR0[i] = IA32_XFD[i] = 1; instead, it operates as if XINUSE[i] = 0 (and the state component was in its initial state): it saves bit i of XSTATE_BV field of the XSAVE header as 0; in addition, XSAVE saves the initial configuration of the state component (the other instructions do not save state component i). Alternatively, KVM could always do XRSTOR with XFD=0, e.g. by using a constant XFD based on the set of enabled features when XSAVEing for a struct fpu_guest. However, having XSTATE_BV[i]=1 for XFD-disabled features can only happen in the above interrupt case, or in similar scenarios involving preemption on preemptible kernels, because fpu_swap_kvm_fpstate()'s call to save_fpregs_to_fpstate() saves the outgoing FPU state with the current XFD; and that is (on all but the first WRMSR to XFD) the guest XFD. Therefore, XFD can only go out of sync with XSTATE_BV in the above interrupt case, or in similar scenarios involving preemption on preemptible kernels, and it we can consider it (de facto) part of KVM ABI that KVM_GET_XSAVE returns XSTATE_BV[i]=0 for XFD-disabled features. [Move clea ---truncated---

Timeline

Scores

EPSS (exploitation in 30 days)

0.22% · top 88% of all CVEs (11 Nov 2026)

CISA SSVC

Exploitation: none · Automatable: no · Technical impact: partial

The list uses the assigner's score when there is one, then CISA's, then NVD's: Medium 5.5.

Affected products

• Linux · Linux

  • affected 820a6ee944e74e57255ac2e90916ecdaade57b95 – < b5995c01ba53d84182ecb9492fc4d91cfe8a362d
  • affected 820a6ee944e74e57255ac2e90916ecdaade57b95 – < 1e2848bda819af569dfe7ab186223855e092a2cb
  • affected 820a6ee944e74e57255ac2e90916ecdaade57b95 – < f577508cc8a0adb8b4ebe9480bba7683b6149930
  • affected 820a6ee944e74e57255ac2e90916ecdaade57b95 – < eea6f395ca502c4528314c8112da9b5d65f685eb
  • affected 820a6ee944e74e57255ac2e90916ecdaade57b95 – < b45f721775947a84996deb5c661602254ce25ce6

• Linux · Linux

  • affected 5.17
  • unaffected < 5.17
  • unaffected 6.1.162 – ≤ 6.1.*
  • unaffected 6.6.122 – ≤ 6.6.*
  • unaffected 6.12.67 – ≤ 6.12.*
  • unaffected 6.18.7 – ≤ 6.18.*
  • unaffected 6.19 – ≤ *

Sources

The same CVE in the primary databases and aggregators, to check against.

• CVE.org record (opens in a new tab)
• CVE List JSON (GitHub) (opens in a new tab)
• NVD (opens in a new tab)
• FIRST EPSS (opens in a new tab)
• EUVD EUVD-2026-4627 (opens in a new tab)
• OSV.dev (opens in a new tab)
• GitHub Advisories (opens in a new tab)
• CIRCL Vulnerability-Lookup (opens in a new tab)

Badge for a README or a ticket

[![CVE-2026-23005](https://cveledger.app/badge/CVE-2026-23005.svg)](https://cveledger.app/cve/CVE-2026-23005)

Record last updated 10 Nov 2026, 12:41 UTC.